A trampoline is a popular recreational and workout equipment for the backyard. It allows year-round exercise for the entire family.
Still, you may be obliged to disassemble the trampoline for a variety of reasons. As a result, you can learn how to disassemble a trampoline as a do-it-yourself project.
If you don’t know the exact procedure, it will be tough, and you may damage the trampoline or cause a serious accident.
That is why we have come to show you how to disassemble a trampoline without causing any damage to it. We’ll discuss the topic in-depth, so you can securely take down the trampoline.
Table of Contents
Why is trampoline disassembly necessary?
Before we go into the trampoline disassembly procedure, let’s go over a few reasons why you should conduct trampoline disassembly. The most important causes are mentioned below.
- Selling purpose
- Backyard renovation
- Relocating reason
- Protection during harsh weather
If your trampoline is exposed to winter, snow, or high winds, the elements may severely damage it. However, you can save money on repairs and maintenance by dismantling the trampoline.
This will also considerably prolong the trampoline’s lifespan.
When should you disassemble your trampoline?
- If your trampoline will not be used for an extended period, we strongly advise you to disassemble it. This shields the trampoline from the sun, storm damage, wildlife, and unauthorized users.
- Please disassemble your trampoline before relocating it to a new location. Moving a complete trampoline is not recommended because the moving procedure may cause damage to the components.
Can you disassemble a trampoline on your own?
Trampoline disassembly is a simple step-by-step procedure that you may complete on your own. You can do it alone, but it is best to have one person with you during the disassembly process because two people will safely disassemble a trampoline better than one person will.
You can dismantle a 5 ft, 8 ft, or 10 ft trampoline yourself. However, the disassembly of trampolines 12 feet, 14 feet, 15 feet, and above needs at least two people.
If you do it alone and make a mistake, your trampoline may be damaged. As a result, we do not advise you to take down a trampoline on your own.
Trampoline disassembly tools
When you buy a new trampoline, it should come with assembly tools. Typical assembly tool kits include a screwdriver, rubber mallet, spring puller, and more.
In most circumstances, these tools will suffice for trampoline disassembly. However, if you possess a used trampoline or have misplaced your trampoline toolkits, you may purchase the following tools to disassemble the trampoline:
- Safety gloves and goggles
- Phillips Head screwdriver
- Electric drill
- Spring puller
- 10 mm spanner
This is one of the most crucial tools for trampoline removal. It is also known as a trampoline hook at times. The T-hook is a popular spring-pulling alternative in which the spring-pulling end includes a 90-degree bend to pull the spring.
Its handle is often constructed of plastic or metal, and the pulling end has a metal body. The ergonomic handle aids in exerting force on the spring.
It should be noted that screwdrivers, pliers, and caulking guns are also used as spring tool alternatives.
Spanner and screwdriver
A good screwdriver is required to loosen the trampoline bolt. Phillips Head screwdrivers are typically utilized in such scenarios.
On the other hand, a spanner has an open end and a box end, making it an excellent tool for trampoline disassembly.
Electric drills can be used to loosen screws quickly. This tool is not required for trampoline disassembly. You can purchase or borrow something to complete your assignment.
Hand gloves and goggles
Gloves and goggles can be used to protect your hands and eyes, respectively. You should think about getting double-coated gloves.
Getting ready to dismantle your trampoline
Ensure you have a large container to carry all the springs, netting, and other small articles when disassembling your trampoline.
You can speed up the assembly process by placing these materials in a predetermined container.
Do not try to assemble the trampoline or safety equipment if any components are missing.
Taping the trampoline’s key pieces together may be a good way to ensure that no substantial components are lost. This keeps the essential components together and simplifies transportation.
Other items should not be allowed to rest on the components. Keeping the components safe will keep them from hurting other large objects in the region.
To prevent insects and animals from chewing or nesting in soft components such as netting, safety cushions, and trampoline tents, wrap or cover them for long-term storage.
How to disassemble a trampoline – step by step
Step 1: Trampoline cleaning
You should clean the entire trampoline before disassembling it. Because you will be storing the trampoline for an extended time, trampoline cleaning will be beneficial.
Sweep the trampoline bed with a long-handled broom. Then, using warm soapy water and a soft brush, clean away the accumulated grime.
The mat should then be rinsed with a garden hose.
If rust forms on trampoline springs, poles, frames, or any other metal part, use lemon paste and scrape off the paste until the rust is entirely removed. There are also various professional rust removers.
Some experts, however, recommend eliminating the residue after dismantling the trampoline.
Before dismantling a trampoline, a basic level of cleaning should be performed.
Step 2: Remove the ladder, poles, net, and extra accessories.
Slack pieces should be removed first. If your trampoline has a clubhouse, take it down gently. Untie any basketball hoops that are attached to trampolines.
Then remove the poles, net, and ladder. Many trampoline poles are now attached to the frame through screws; in this case, unscrew them.
Check for debris and grime once you’ve removed all of these parts. If any part has severe rust, you can use a water-based, non-toxic rust remover.
Wrap the poles in wrapping tape to lengthen their life. Clean and fold the trampoline net so that it can be stored for future use. Don’t forget to zip the enclosure net’s zipper.
Step 3: Disassemble the spring pad
Most spring covers are made of a single piece of adequately thick material. Under the trampoline, pads are linked together. You can easily detach the safety pad by untying the knots.
If you find a tear in the spring pad, label it with duct tape and repair it. After that, fold the pad and store it in the storage box.
Step 4: Springs disassembling
The first spring removal is critical. Take your spring tool or an alternate one and determine where you want to start with your preferred spring.
Pull the inner part of the spring towards the mat center until it loosens and comes free of the mat’s V-ring. Remove the spring’s other hook end from the frame.
After you’ve disassembled the first spring, you can use the same method to remove any other springs. Use the detached spring as a puller if you need to remove the spring quickly or don’t have enough leverage.
After you’ve removed all of the springs, inspect them for rust or corrosion. Rust remover should be used on the springs with rust. Finally, preserve the springs in their original spring packet.
If you intend to use the first detached spring to remove other springs, you need to know some facts. Trampoline springs feature two distinct ends: closed-end and open-end.
The open end is attached to the frame, while the closed or loop end is attached to the mat’s V-ring. When removing springs, use the open-end instead of the springs’ end.
It should be noted that removing springs from rusted trampolines is more difficult than removing springs from healthy trampolines. When working with rusted trampolines, you must use gloves.
The method for removing the spring from a rusted trampoline is as follows:
- Using a spring puller or spring tool, remove the first spring.
- Then, disassemble the spring that is directly opposite the first one.
- Then, move to 90 degrees and remove the spring using a spring tool or spring.
- Then, go to its opposite side spring and pull it apart
- Repeat the process until all of the springs have been removed.
Step 5: Jumping mat folding
When the springs are removed, the mat automatically disassembles, leaving only the trampoline frame standing. Let’s have a look at how to fold a trampoline mat.
Place the trampoline mat down on the ground. Fold it in half first, then continue the process until it fits within your box.
In addition, inspect the mat for tears and wear so you can patch the mat hole with a repairing kit.
Step 6: Dismantle the trampoline frame
The method of disassembling the trampoline frame is the inverse of the process of assembling it. You simply unscrew, unscrew, and unscrew.
The Phillip Head screwdriver will assist you in properly unscrewing. Use an electric drill for quick unscrewing.
In a windy region, trampolines have grounded wind pegs that must be removed to prevent the trampoline from blowing away. After removing the wind pegs, untie all of the frame’s screws.
It’s now time to remove the legs and outer ring. Do this with caution since heavy legs may fall on you and badly injure you.
To separate the legs from the ring, apply upward pressure on it. To avoid harm, separate the legs from the rings while standing in the center of the leg.
Detach the outer rings and legs, then disassemble the outer ring and T-joints. You can accomplish this by simply twisting the rings. Collect all of the frame parts and place them in the packaging.
What comes next?
So you completed the trampoline disassembly successfully. If you want to utilize your favorite trampoline the following year, keep all of the pieces in a dry, out-of-the-way location.
Aside from that, if you want to renovate or relocate your backyard, go ahead and do it.
How to dismantle a Springfree trampoline
A Springfree trampoline has a unique design. This means that the steps for dismantling a Springfree trampoline are distinct.
Fortunately, it’s not complicated. It should be noted that this removal will necessitate the participation of two people.
Removing the rod
The rod is the main component that holds the mat to the frame. To keep the rod firmly in place, one person goes under the mat and into the frame.
The next person stands outside the frame, holding the rod at the mat’s attachment point.
Outside the frame, the user pulls up the rod while grasping the inside of the mat. The rod is lifted and pulled to the side of the rod’s lower end.
The rods are removed one at a time until the mat is free. The trampoline frame can then be readily dismantled.
How to uncouple a corroded trampoline
Uncoupling a rusted trampoline can be difficult if you are not paying close attention. When you handle a rusted trampoline, you never know what will happen.
First and foremost, make sure you are always wearing gloves. Unstrap the safety pads first, then concentrate on removing the springs.
As we previously stated, when it comes to rusted springtimes, you must remove them according to the following comprehensive instructions: Choose the first spring you intend to remove, then remove the one on the opposite side.
Follow this pattern until there are no more springtimes. The framework must then be carefully removed. You might need help taking down each spring to get rid of a screwdriver.
Trampoline frame stuck
As you take care of the framework, you may find yourself dealing with a truly persistent frame. Make this step easy by applying a permeating oil of your choice and allowing it to sit for at least 10 minutes.
After that, to make this step go faster, we recommend loosening the top screws first to ensure that you can remove the stands by pulling up on the ring. If the legs’ pipes do not come off immediately, spin them, and they will readily come off the ring.
After that, you will only be left with the created ring, which you may now remove and store the components.
Reinstalling or packing up the trampoline
If you are a guy, you should disassemble the trampoline to protect it from heavy snow or heat. Then you won’t have to use it for at least the following six months.
As a result, you can keep all the pieces in a safe and dry area. The steel parts must be retained within; otherwise, they would be useless for dismantling.
On the other hand, if your goal in deconstructing the trampoline is to move it to a new location, you can do it easily now. You may need to relocate the trampoline a short distance from time to time.
You do not need to disassemble the trampoline in this situation. You may effortlessly move your trampoline to the desired place by following a few simple steps.
How do you remove a trampoline spring without a tool?
Even if you don’t have a spring tool, you can easily remove the springs. This method may be simpler than utilizing the tool. You only need to take out one spring (or use an extra one you have).
Use that spring as a tool, placing one of its hooks into the hook of the still-attached spring where it meets the frame. Pull it out and remove the hook from the frame’s hole.
Just keep a careful eye on your fingers, as the springs can pinch at times! This is where gloves come in handy.
People also ask these concerning how to disassemble a trampoline:
Is it compulsory to disassemble the frame?
No, it is not required in all circumstances. You can keep the trampoline frame outside if you disassemble it to preserve it from bad weather.
In this instance, the trampoline frame may require some care and maintenance. The disassembly process may be handy when moving a trampoline over long distances.
Is professional trampoline assembly and disassembly service good?
There are various trampoline assembly-disassembly services around you, whether you require trampoline installation or uninstallation. The majority of them will provide professional services for less than $200.
However, we encourage that you do it yourself as a DIY project so that you can dismantle it quickly if necessary.
How can you safely store a trampoline?
The trampoline parts must be kept dry and away from direct sunlight. If the trampoline is small enough and you don’t want to disassemble it, this is an option.
Maintain it horizontally throughout your home. However, it will obstruct your living space. Therefore we propose preserving it after deconstructing it in the manner described above.
How long does it take to take a trampoline apart?
This is determined by trampoline type and trampoline size. Trampolines with springs require more time to set up than trampolines without springs.
Most spring-free trampolines can be disassembled in 2 hours or less, whereas spring-based trampolines require 4 hours or more.
Is it easier to dismantle a Springfree trampoline than a regular trampoline?
Yes, because there is no spring, Springfree trampolines are easy to disassemble. The most time-consuming aspect of trampoline construction and disassembly is the spring.
How much does it cost to disassemble a trampoline?
There are various trampoline disassembly services available that provide trampoline setup and disassembly services at an affordable rate. The prices vary depending on the size and type.
Generally, the price ranges from $100 to $500 or more.
If you are not sure about your ability to dismantle your trampoline yourself, we recommend contacting a professional to handle the job.
It is suggested that you thoroughly read the manufacturer’s instructions before disassembling the trampoline, as the process may differ slightly from trampoline to trampoline.
The essential technique, though, is the same. And, of course, adhere to all safety precautions.
Hopefully, after reading this comprehensive guide, you understand how to disassemble a trampoline properly.
However, if you have any questions, please leave them in the comments section. Have a wonderful day!